| BORE DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C12 |
| CONTACT ANGLE | 15.1 DEGREES NOMINAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL TEST FEATURES | TORQUE TESTED TO MEET MORE CRITICAL SPECIFICATION VALUES FOR VERY LOW TORQUE LEVELS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |