| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7400 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ISI ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL SNAP RING |
| NOMINAL THREAD SIZE | 0.2500 INCHES |
| SPECIAL FEATURES | 2020 LBS RADIAL LOAD,200 LBS THRUST LOAD,RADIAL CLEARANCE 0.0002 IN. MIN 0.0010 IN. MAX,0.0700 IN. DIA INSPECTION HOLE 0.3750 IN FROM BOTTOM ON CENTER LINE IN SHANK,GREASE FITTING IN HEAD,NAS 513 KEYWAY ACROSS FLATS |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.4370 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM |
| SHIELD QUANTITY | 2 |
| WIDTH ACROSS FLATS | 0.4370 INCHES NOMINAL |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 28 |