|
|
|
National Stock Number:
3110-01-036-9829
Federal Supply Class:
3110
National Item Identification Number:
010369829
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| SK-532 | 57448 | STEPHENS-ADAMSON INC A SUB OF ALLIS-CHALMERS CORP |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 2.1875 INCHES MINIMUM AND 2.1881 INCHES MAXIMUM | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 3.1200 INCHES MINIMUM AND 3.1250 INCHES MAXIMUM | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | LUBRICANT | | OUTER RING WIDTH | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 4.3299 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM | | MATERIAL | STEEL BALL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | MATERIAL | STEEL SNAP RING | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | SPECIAL FEATURES | TRIPLE LIP SEALS,LUBE HOLE AND LOCKING PIN HOLE IN OUTER RING,TWO 1/16-20 THD SETSCREW HOLES 120 DEG APART IN EACH END OF INNER RING LOCATED 13/32 IN. FROM FACE OF INNER RING | | SURFACE FINISH | GROUND |
|
|