| BEARING PRELOAD RATING | 6.0 POUNDS MINIMUM AND 11.0 POUNDS MAXIMUM |
| BORE DIAMETER | 0.59075 INCHES MINIMUM AND 0.59095 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 19.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM |
| INTERNAL CLEARANCE | 0.0012 INCHES NOMINAL RADIAL |
| INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | OUTWARD CONVERGENT |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 1.12435 INCHES MINIMUM AND 1.12455 INCHES MAXIMUM |
| OVERALL WIDTH | 0.5604 INCHES MINIMUM AND 0.5624 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| SHIELD QUANTITY | 1 |
| SPECIAL FEATURES | BALL SEPARATOR MATERIAL SHALL BE DELRIN 100 OR DELRIN 500 (E.I. DUPONT)OR EQUIVALENT; SHIELD MATERIAL SHALL BE CORROSION-RESISTANT STEEL;PART OF A DRIVE ASSY. USED ON PIGA |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | PASSIVATE OVERALL |