| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6563 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE END PLATE |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL | PLASTIC POLYAMIDE INNER WASHER |
| MATERIAL | PLASTIC POLYAMIDE SEAL |
| MATERIAL | STEEL COMP E52100 END PLATE |
| MATERIAL | STEEL COMP E52100 STUD |
| MATERIAL | STEEL COMP E52100 WASHER |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | WITH MEANS FOR RELUBRICATION,LUBRICANT HOLE 0.0937 IN. DIA,LOCATED IN GRID AREA 0.2500 IN. FROM WASHER |
| STUD DIAMETER | 0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM |
| STUD LENGTH | 1.0000 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| SURFACE TREATMENT | OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.5000 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNF |