| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| COTTON AND |
| PLASTIC PHENOLIC RETAINER |
| STEEL CORROSION RESISTING SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-P-79,TY FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.5570 INCHES MINIMUM AND |
| 0.5620 INCHES MAXIMUM |
| BORE DIAMETER | 0.8748 INCHES MINIMUM AND |
| 0.8750 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.3121 INCHES MINIMUM AND |
| 1.3125 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND |
| 0.0008 INCHES MAXIMUM RADIAL |
| BEARING PRELOAD RATING | 4.0 POUNDS NOMINAL |