| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 35.0 MILLIMETERS NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OVERALL OUTSIDE DIAMETER | 62.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 14.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 204-040-623-5,97499 MFR REF SINGLE MATERIAL RESPONSE AND AISIC1008 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1008 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | RUBBER AND STEEL COMP 1008 SEAL |
| MATERIAL | STEEL COMP 1008 RETAINER |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | LUBRICATE W/2.00GM PORM 0.25GM OFSPECIFIED LUBRICANT |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |