| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7655 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL | STEEL COMP 301 RETAINER |
| MATERIAL | STEEL COMP 4130 ROD END BODY |
| MATERIAL | STEEL COMP 4130 OUTER RACE |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RACE |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| SPECIAL FEATURES | 80 PCT OF SPECIFIED LUBRICATION |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | EXTERNAL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SHANK DIAMETER | 0.3750 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | LEFT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNJF |