| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND 1.8950 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| OVERALL LENGTH | 2.2650 INCHES MINIMUM AND 2.2700 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | IL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 430 SHIELD |
| MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATERIAL | STEEL SNAP RING |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SHANK DIAMETER | 0.2500 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.2500 INCHES MINIMUM AND 1.3100 INCHES MAXIMUM |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | 0.0002 IN. MIN 0.0010 IN. MAX RADIAL INTERNAL CLEARANCE,PLASTIC FLUSH TYPE GREASE FITTING LOCATED 45 DEG BY 0.4840 IN. MAX FROM CENTER LINE |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNJF |