| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| INNER RING WIDTH | 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.3950 INCHES MINIMUM AND 2.4250 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.4450 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| OVERALL LENGTH | 3.7850 INCHES MINIMUM AND 3.8050 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.3600 INCHES MINIMUM AND 1.4100 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | PLASTIC PHENOLIC SEAL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 430 SHIELD |
| MATERIAL | STEEL COMP 4620 ROD END BODY |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SHANK DIAMETER | 0.5000 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.3100 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM |
| SHIELD QUANTITY | 3 |
| SPECIAL FEATURES | INTERNAL CLEARANCE 0.0002 IN. MIN 0.0010 IN. MAX,KEYWAY 0.1290 IN. MAX WIDE BY 0.0860 IN. MAX DEEP CENTER LINE OF SHANK EXTENDING 1.3600 IN. MAX FROM CENTER OF BORE WITH 1.0000 IN. RADIUS,NAS 516 GREASE FITTING IN HEAD |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNJF |