| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 15.0 MILLIMETERS NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 35.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 11.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 660 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | COPPER ALLOY 932 RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | FRACTURED OUTER RING WITH TWO HOLIDNG RINGS OF 17-4PH CRES; STABILIZED FOR OPERATION FROM -65.0 DEG F TO +350.0 DEG F; DEMAGNETIZED BEFORE FINAL CLEANING,NOT TO EXCEED 5.0 GAUSS |
| SPECIAL TEST FEATURES | NOISE AND VIBRATION TESTED |
| SPECIFICATION/STANDARD DATA | 99193-3501156 MANUFACTURERS SOURCE CONTROL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |