| BORE DIAMETER | 0.1967 INCHES MINIMUM AND 0.1969 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| INTERNAL FIT-UP DESIGNATION | TIGHT |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | LUBRICANT |
| OVERALL OUTSIDE DIAMETER | 0.6297 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1968 INCHES MINIMUM AND 0.1969 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 430 RETAINER |
| MATERIAL | STEEL COMP 440A BALL |
| MATERIAL | STEEL COMP 440A INNER RING |
| MATERIAL | STEEL COMP 440A OUTER RING |
| MATERIAL | STEEL SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |