| BORE DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C |
| FLANGE OUTSIDE DIAMETER | 0.9996 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0630 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | LUBRICANT |
| OUTER RING OUTSIDE DIAMETER | 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1948 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 SHIELD |
| MATERIAL | STEEL COMP 430 RETAINER |
| SPECIAL FEATURES | 3 MTG HOLES 0.109 IN. DIA ON FLANGE FACE EQUALLY SPACED ON 0.812 IN. PITCH DIA |
| RETAINER FABRICATION METHOD | STAMPED |
| SHIELD QUANTITY | 2 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |