|
|
|
National Stock Number:
3110-00-803-0558
Federal Supply Class:
3110
National Item Identification Number:
008030558
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| AS21153 | 0U583 | SAE INTERNATIONAL | | AS21153 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M21153-2G | 0U583 | SAE INTERNATIONAL | | M21153-2G | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS21153-2G | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | REP3F5-2G | 73134 | ROLLER BEARING CO OF AMERICA INC | | REPB3N2 | 21335 | TIMKEN CO | | REPB3N21B100B000075K0000J | 38443 | SKF USA INC. | | REPB3N2FS210 | 21335 | TIMKEN CO | | REPB3N2FS428 | 21335 | TIMKEN CO | | SAE AS21153 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.1900 INCHES NOMINAL | | INNER RING WIDTH | 0.4370 INCHES NOMINAL | | LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | OUTER RING WIDTH | 0.3280 INCHES NOMINAL | | OVERALL LENGTH | 1.7660 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL ROD END BODY | | MATERIAL | STEEL WASHER | | NOMINAL THREAD SIZE | 0.312 INCHES | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT LOCATION | INTERNAL | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SHANK DIAMETER | 0.4380 INCHES NOMINAL | | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END | | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL | | WIDTH ACROSS FLATS | 0.4380 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|