| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 7.7 DEGREES MINIMUM AND 13.7 DEGREES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 0.8700 INCHES NOMINAL |
| FLANGE WIDTH | 0.0320 INCHES NOMINAL |
| INNER RING WIDTH | 0.1562 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | S-2049-01,FSCM 35351 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OUTER RING OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL |
| OUTER RING WIDTH | 0.1562 INCHES NOMINAL |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEPARATOR SLUG |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RACE |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | THREE RING ASSEMBLY CONSISTING OF SINGLE ROW BEARING WITHIN DOUBLE ROW BEARING; THREE EQUALLY SPACED HOLES THROUGH FLANGE ON 0.750 IN. NOM BOLT CIRCLE,0.083 IN. DIA MIN TO 0.085 IN. DIA MAX |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE INNER RACE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT | PHOSPHATE BALL |
| SURFACE TREATMENT | PHOSPHATE INNER RACE |
| SURFACE TREATMENT | PHOSPHATE INNER RING |
| SURFACE TREATMENT | PHOSPHATE OUTER RING |