| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.3050 INCHES MINIMUM AND 2.3350 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DC44,DOW CORNING CORP MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3250 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM |
| OVERALL LENGTH | 2.9300 INCHES MINIMUM AND 2.9900 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.3000 INCHES MINIMUM AND 1.3520 INCHES MAXIMUM |
| MATERIAL | STEEL COMP E52100 OVERALL |
| NOMINAL THREAD SIZE | 0.437 INCHES |
| RETAINER FABRICATION METHOD | STAMPED |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT ANGLE | 0.10 DEGREES NOMINAL |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SHANK DIAMETER | 0.4375 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | DIFFERENTIATED BY 0.0701 IN. HOLE CENTERED ON FLAT OF SHANK 0.640 IN. FROM CENTER OF BORE |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNJF |