| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2496 INCHES MINIMUM AND 0.2502 INCHES MAXIMUM |
| INNER RING WIDTH | 0.5525 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE END PLATE |
| MATERIAL | RUBBER POLYISOPRENE NATURAL CLASS NR SEAL |
| MATERIAL | STEEL COMP 1055 END PLATE |
| MATERIAL | STEEL COMP E52100 OR STEEL COMP E51100 OR STEEL COMP E50100 ROLLER |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | OIL HOLE AND GROOVE IN INNER RING,OIL GROOVE ON ID OF OUTER RING |
| STYLE DESIGNATOR | CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | OXIDE EXPOSED SURFACES AS MOUNTED |