| BORE DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OVERALL OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | TIGHTLY CLINCHED RIBBON RETAINER |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |