|
|
|
National Stock Number:
3110-00-158-6520
Federal Supply Class:
3110
National Item Identification Number:
001586520
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 713469 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 88100 | 24617 | GENERAL MOTORS CORP | | 88100 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.6263 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 0.8125 INCHES NOMINAL | | INTERNAL CLEARANCE | 0.0020 INCHES MINIMUM RADIAL AND 0.0035 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OUTER RING WIDTH | 0.4331 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 1.3780 INCHES NOMINAL | | MATERIAL | STEEL BALL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | SPECIAL FEATURES | SLOT 0.1875 IN. W BY 0.1720 IN. DEEP ON INNER RING FACE | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|