|
|
National Stock Number: 3110-00-157-6105
Federal Supply Class: 3110
National Item Identification Number: 001576105
Description: BEARING,BALL,ANNULAR
Detail: A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
208CTC | 38443 | SKF USA INC. | 6538 | 43766 | SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV | 6538 | 52676 | SKF USA INC. | 700190 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | 908092 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | 908092 | 24617 | GENERAL MOTORS CORP | 908092 | 7X677 | GENERAL MOTORS LLC | 909422 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | 909422 | 24617 | GENERAL MOTORS CORP | 909422 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | 909422 | 7X677 | GENERAL MOTORS LLC | 909422 | 80040 | L AND S BEARING CO INC | A900 | 70801 | AUTOMOTIVE THRUST BEARING CORP | CB1086C | 72898 | GREEN BALL BEARING CO | CB1096C | 72898 | GREEN BALL BEARING CO | CT1086H | 80040 | L AND S BEARING CO INC | CT22 | 80040 | L AND S BEARING CO INC | CT22X1B | 24617 | GENERAL MOTORS CORP | CT22X1B | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | CT22X1B | 7X677 | GENERAL MOTORS LLC | N1086 | 43766 | SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV | N1086 | 52676 | SKF USA INC. |
|
Techincal Specification:
EFFECTIVE LENGTH | 1.2500 INCHES NOMINAL | BORE DIAMETER | 1.3750 INCHES MINIMUM AND 1.3830 INCHES MAXIMUM | BORE SHAPE | STRAIGHT | CONTACT ANGLE | 25.0 DEGREES NOMINAL | FLANGE OUTSIDE DIAMETER | 2.0600 INCHES MINIMUM AND 2.0650 INCHES MAXIMUM | GROOVE DIAMETER | 1.6200 INCHES MINIMUM AND 1.6230 INCHES MAXIMUM | GROOVE WIDTH | 0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM | LOAD DIRECTION | ANGULAR | LUBRICATION MATERIAL | GREASE | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE | OVERALL LENGTH | 1.8750 INCHES NOMINAL | OVERALL OUTSIDE DIAMETER | 2.8125 INCHES NOMINAL | MATERIAL | STEEL OVERALL | RETAINER FABRICATION METHOD | PRESSED | SPECIAL FEATURES | BANDED OD | STYLE DESIGNATOR | CLUTCH RELEASE, INTEGRAL INNER RING W/FORK GROOVE, SLIDER TYPE | SURFACE FINISH | GROUND |
|
|