|
|
|
National Stock Number:
3110-00-156-3427
Federal Supply Class:
3110
National Item Identification Number:
001563427
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 16379P | 37923 | DESA INDUSTRIES INC DIV OF AMCA INTERNATIONAL CORP | | 200-016 | 96153 | CUMMINS-ALLISON CORP. DBA CUMMINS-ALLISON DIV FEDERAL GOVERNMENT DEPARTMENT | | 200FSF | 38443 | SKF USA INC. | | 200KLD | 21335 | TIMKEN CO | | 200KLDC7FS381A | 21335 | TIMKEN CO | | 200KLDFS104 | 21335 | TIMKEN CO | | 200KLDFS504 | 21335 | TIMKEN CO | | 200LD | 21335 | TIMKEN CO | | 20301 | 37923 | DESA INDUSTRIES INC DIV OF AMCA INTERNATIONAL CORP | | 797 | 55111 | SKIL CORP | | 87500 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | 87500CE1SA2 | 53035 | NSK CORP BEARING DIV | | 87500X1C | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | C87500X1C | 24617 | GENERAL MOTORS CORP | | C87500X1C | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | C87500X1C | 7X677 | GENERAL MOTORS LLC | | FF-B-171 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FS87500 | 21760 | SCHATZ BEARING CORPORATION |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 10.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 0.4800 INCHES NOMINAL | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OUTER RING WIDTH | 0.3540 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 30.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 0.5000 INCHES NOMINAL | | MATERIAL | STEEL BALL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 1 | | SHIELD QUANTITY | 1 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|