| BEARING PRELOAD DESIGNATION | LIGHT |
| BEARING PRELOAD RATING | 2.5 POUNDS NOMINAL |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| OVERALL OUTSIDE DIAMETER | 0.3125 INCHES NOMINAL |
| OVERALL WIDTH | 0.2500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 3000 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP 410 RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 1 |
| SHIELD QUANTITY | 1 |
| SPECIAL FEATURES | PAIR OF BEARINGS FLUSH GROUND FOR DUPLEX MOUNTING W/SHIELDED SIDES TOGETHER,ECCENTRICALLY MATCHED AND MARKED AT THE OUTER RING |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| SURFACE FINISH | GROUND |