| BORE DIAMETER | 0.9844 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0014 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-23699 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 1.8504 INCHES NOMINAL |
| OVERALL WIDTH | 0.9449 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | COPPER ALLOY RETAINER |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M 65 TO P 250 DEG F,RETAINER SILVER- PLATED 0.0005 IN. TO 0.0015 IN. THK PER AMS 2412,ROCKWELL HARDNESS C SCALE60 TO 64 BALL,INNER AND OUTER RINGS,MAX SURFACE FINISH INNER AND OUTER RACEWAYS 8 UIN AA,ASSY RELATIONSHIP MARKING /V/ ON OD OF BEARING ELEMENTS |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 02731-369A5432 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |