| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1250 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 0.3125 INCHES NOMINAL |
| OVERALL WIDTH | 0.1406 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | GLASS FIBER AND PLASTIC SEAL |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 1 |
| SHIELD QUANTITY | 1 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |