|
|
|
National Stock Number:
3040-01-537-6565
Federal Supply Class:
3040
National Item Identification Number:
015376565
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7002822 | 15090 | RAYTHEON COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END FLAT DEPTH | 0.0520 INCHES NOMINAL | | FIRST END DIAMETER | 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | FIRST END STYLE | FLATTED | | LARGEST STEP DIAMETER | 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | OVERALL LENGTH | 5.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, SHOULDERED | | SECOND END DIAMETER | 0.2100 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM | | SECOND END STEP LENGTH | 0.390 INCHES NOMINAL | | SECOND END STYLE | TONGUE ROUNDED ENDS | | SECOND END TONGUE THICKNESS | 0.118 INCHES MINIMUM AND 0.123 INCHES MAXIMUM | | SECOND END TONGUE WIDTH | 0.210 INCHES MINIMUM AND 0.212 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM USED ON DETENT ASSY IN LAU-128 AND LAU-129 LAUNCHERS; IT IS PART OF ECP L-039; TONGUE NED HAS 0.097 DIA CROSS DRILLED THRU HOLE | | STEP QUANTITY | 3 |
|
|