|
|
|
National Stock Number:
3040-01-533-4453
Federal Supply Class:
3040
National Item Identification Number:
015334453
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 87921-01 | 5H860 | THOMAS INSTRUMENT, INCORPORATED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM | | FIRST END TONGUE THICKNESS | 0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | FIRST END TONGUE WIDTH | 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM | | FIRST END STEP LENGTH | 0.160 INCHES NOMINAL | | FIRST END STYLE | RECTANGULAR | | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL | | OVERALL LENGTH | 1.100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 TYPE1 303 COND AX (1/4) RND BAR ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, LINEAR ACTR, ELMECH, AFT RAMP C-5 | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.260 INCHES NOMINAL | | SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM | | SECOND END SLOT DEPTH | 0.060 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.047 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED HOLE AND SLOTTED | | SECOND END HOLE DEPTH | 0.187 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0625 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM | | SPECIAL FEATURES | CROSS DRILLED HOLE IS A THRU HOLE | | STEP QUANTITY | 4 |
|
|