|
|
|
National Stock Number:
3040-01-528-6997
Federal Supply Class:
3040
National Item Identification Number:
015286997
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2155-0197 | 86831 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC | | 2155-0197-1 | 86831 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | LARGEST STEP DIAMETER | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6265 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-PAWL, NO-BACK | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.690 INCHES NOMINAL | | SPECIAL FEATURES | MATERIAL IS 9310 STEEL; DIAMETER AT SMALLEST END OF SHAFT IS 0.4365 INCHES NOMINAL & 0.700 INCHES NOMINAL AT LARGEST END; NHA P/N IS 0009-0146; SMALLEST STEP IS 0.110 INCHES IN LENGTH, SECOND SMALLEST STEP IS 0.140 INCHES IN LENGTH AND THIRD LARGEST STEP IS 1.440 INCHES NOMINAL IN LENGTH | | STEP QUANTITY | 3 |
|
|