|
|
|
National Stock Number:
3040-01-528-5763
Federal Supply Class:
3040
National Item Identification Number:
015285763
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2075-0243-1 | 86831 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC |
|
Techincal Specification:
| LARGEST STEP DIAMETER | 0.985 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6417 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, INPUT, SECONDARY | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 7.400 INCHES NOMINAL | | SPECIAL FEATURES | NHA P/N IS 0009-0145; SHAFT HAS EXTERNAL SPUR GEAR WITH 13 TEETH; MATING GEAR P/N IS 2075-0245-1 WHICH HAS 103 TEETH; SHAFT ALSO HAS INTERNAL INVOLUTE SPLINE AT ONE END WITH 15 TEETH | | STEP QUANTITY | 6 |
|
|