|
|
|
National Stock Number:
3040-01-523-2618
Federal Supply Class:
3040
National Item Identification Number:
015232618
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 17G111016 | 88277 | THE BOEING COMPANY | | 17G111016-159 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 1.590 INCHES NOMINAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.622 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 304 CONDITION A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.080 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.190 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0600 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.5620 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | TWO FLATS ON SECOND END; NHA P/N17G111016-151 USED ON POST ASSEMBLY-FLAP HOLDING FIXTURE | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|