|
|
|
National Stock Number:
3040-01-521-3107
Federal Supply Class:
3040
National Item Identification Number:
015213107
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 323913 | 62983 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8300 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.403 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 1.6720 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.0780 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | OVERALL LENGTH | 3.349 INCHES NOMINAL | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CYLINDER BEARING | | SECOND END DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.440 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0780 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | SPECIAL FEATURES | FIRST END HAS 0.109 DIA HOLE 0.45 INCHES DEEP; SHAFT HAS .095 DIA CROSSDRILLED HOLE THRU; 1.651 INCHES CENTER OF SHAFT'S CROSSDRILLED HOLE TO FIRST END; T.O. 9H7-3-14-3 FIG 5-4 IND 35 AND 52; USED ON HYDRAULIC POWER TRANSFER PACKAGE ASSEMBLY | | STEP QUANTITY | 5 |
|
|