|
|
|
National Stock Number:
3040-01-520-4399
Federal Supply Class:
3040
National Item Identification Number:
015204399
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HG90042-139 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.3750 INCHES NOMINAL | | FIRST END FLAT DEPTH | 0.0435 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.790 INCHES NOMINAL | | FIRST END STYLE | FLATTED | | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 TYPE 1 15-5PH STEEL ROD SOLN TREATED LENGTH 11 INCHES ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 10.570 INCHES NOMINAL | | SECOND END DIAMETER | 1.7500 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 2.200 INCHES NOMINAL | | SECOND END STYLE | INTERNAL THREADED | | SPECIAL FEATURES | ITEM HAS CROSS DRILLED HOLE THRU ONE SIDE ONLY WITH .25 INCH DIA LOCATED 7 INCHES IN TO CENTER FROM 2ND END; 2ND END HAS INTERNAL THREADS 1.4375-16UN-28 | | STEP QUANTITY | 3 |
|
|