|
|
|
National Stock Number:
3040-01-519-5040
Federal Supply Class:
3040
National Item Identification Number:
015195040
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 17P3A1663 | 88277 | THE BOEING COMPANY | | 17P3A1663-2 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.620 INCHES NOMINAL | | FIRST END DIAMETER | 1.6500 INCHES MINIMUM AND 1.6600 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,STRAIGHT-RAMP TOE,INBD | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 52.380 INCHES NOMINAL | | SECOND END DIAMETER | 1.6550 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 2.180 INCHES NOMINAL | | SPECIAL FEATURES | DASH 2,(-2) ON BASIC P/N STANDS FOR RIGHT HAND; FIVE TAPERS ALONG LENGTH; FOUR HOLES, 0.455 DIA. TOWARD EACH END; TWO HOLES, 0.518 DIA., 1.750 INCHES APART TOWARD CENTER OF SHAFT | | SURFACE FINISH | 125.0 MICROINCHES |
|
|