6605-01-519-4713 COMPUTER,MISSION Index 5305-01-519-4715 SCREW,MACHINE

National Stock Number:
3040-01-519-4714

Federal Supply Class:
3040

National Item Identification Number:
015194714

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.


Manufacturer Information:
17P3A166388277THE BOEING COMPANY
17P3A1663-188277THE BOEING COMPANY


Techincal Specification:
END SIMILARITYIDENTICAL
FIRST END DISTANCE FROM END TO GROOVE0.620 INCHES NOMINAL
FIRST END DIAMETER1.6500 INCHES MINIMUM AND 1.6600 INCHES MAXIMUM
FIRST END GROOVE WIDTH0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM
FIRST END STYLECIRCULAR GROOVED
MATERIALSTEEL CORROSION RESISTING
PART NAME ASSIGNED BY CONTROLLING AGENCYSHAFT,STRAIGHT-RAMP TOE,INBD
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH52.380 INCHES NOMINAL
SECOND END DIAMETER1.6550 INCHES NOMINAL
SECOND END GROOVE WIDTH0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM
SECOND END DISTANCE FROM END TO GROOVE2.180 INCHES NOMINAL
SPECIAL FEATURESDASH 1,(-1), ON BASIC P/N STANDS FOR LEFT HAND; FIVE TAPERS ALONG LENGTH; FOUR HOLES,0.455 DIA.EACH END; TWO HOLES,0.518 DIA., 1.750 INCHES APART TOWARDS CENTER OF SHAFT
SURFACE FINISH125.0 MICROINCHES


Click here to Register for Free 30-day Trial