|
|
|
National Stock Number:
3040-01-519-3858
Federal Supply Class:
3040
National Item Identification Number:
015193858
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 17P3A1664 | 88277 | THE BOEING COMPANY | | 17P3A1664-1 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.630 INCHES NOMINAL | | FIRST END DIAMETER | 1.6500 INCHES MINIMUM AND 1.6600 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,STRAIGHT-RAMP TOE,OUTBD | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 39.390 INCHES NOMINAL | | SECOND END DIAMETER | 1.6500 INCHES MINIMUM AND 1.6600 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 2.200 INCHES NOMINAL | | SPECIAL FEATURES | DASH 1,(-1),ON BASIC P/N STANDS FOR LEFT HAND; FOUR TAPERS ALONG LENGTH;EACH END HAS FOUR HOLES,0.455 DIA,IN TWO SETS OF TWO HOLES EACH; SETS ARE 1.456 INCHES CENTER TO CENTER APART;TWO0.518 DIA. HOLES; ONE 18.027 INCHES I N FROM FIRST END TO CENTER OF HOLE ANDTHE OTHER 19.00 INCHES IN FROM SECOND END TO CENTER OF HOLE | | SURFACE FINISH | 125.0 MICROINCHES |
|
|