| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BORE DIAMETER | 5.500 INCHES NOMINAL |
| COMPRESSED LENGTH | 56.920 INCHES NOMINAL |
| EXTENDED LENGTH | 66.000 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 2.362 INCHES MINIMUM AND 2.364 INCHES MAXIMUM |
| FIRST END FORK SPAN WIDTH | 2.750 INCHES NOMINAL |
| FIRST PISTON ROD END STYLE | FORK TYPE (CLEVIS) |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CYLINDER ASSY,PITCH |
| PORT LOCATION AND QUANTITY | 6 CENTER SECTION |
| PRESSURE RATING | 3800.0 POUNDS PER SQUARE INCH NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY DIAMETER | 3.500 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | SINGLE HOLE |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| MOUNTING TYPE AND LOCATION | BORE CYLINDER BASE |
| SPECIAL FEATURES | CSTROKE 9.08; THREE SAE 08 PORTS;ONE TEST PORT SAE 04;TWO SAE 06 PORTS;CHECK VALVE FMC P/N 623-8650-002;TWO BUSHIBGS FMC P/N 623-8650-003;BLEED SCREW;ROD 2.50 DIA;.50 OD X .065 WALL JIC HYD TUBONG |
| TEMP RATING | 265.0 DEG FAHRENHEIT |
| TEMP RATING | -65.0 DEG FAHRENHEIT |