|
|
|
National Stock Number:
3040-01-484-7593
Federal Supply Class:
3040
National Item Identification Number:
014847593
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2887292 | 99551 | GOODRICH CORPORATION | | 765373 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0820 INCHES MINIMUM AND 1.0825 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 1.4850 INCHES MINIMUM AND 1.5150 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.0450 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 14 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 1.3742 INCHES MINIMUM AND 1.3747 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, SPLINED | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.319 INCHES MINIMUM AND 4.339 INCHES MAXIMUM | | SPECIAL FEATURES | APPLICATION FOR P/N 365373 IS 19E252-8A; SIX EQUALLY SPACED HOLES ON SECOND END FLANGE-0.5 INCHES THRU | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING | | SECOND END HOLE DEPTH | 2.8290 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 1.0823 INCHES NOMINAL | | SECOND END STYLE | FLANGED AND INTERNAL KEYWAY | | SECOND END TAPER | 0.1 PER METER IN MILLIMETERS | | SECOND END STEP LENGTH | 1.9110 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|