|
|
|
National Stock Number:
3040-01-484-6794
Federal Supply Class:
3040
National Item Identification Number:
014846794
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 563-7067896-14 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067896 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H696-1602-14 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.7560 INCHES MINIMUM AND 2.7580 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 5.0000 INCHES NOMINAL | | OVERALL LENGTH | 16.0600 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CRANKSHAFT, VALVE | | MATERIAL | NICKEL ALLOY K-500 | | SECOND END DIAMETER | 2.4930 INCHES MINIMUM AND 2.4940 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 2.1360 INCHES MINIMUM AND 2.1410 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 9 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 6.5000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.4930 INCHES MINIMUM AND 2.4940 INCHES MAXIMUM | | STEP QUANTITY | 5 |
|
|