|
|
National Stock Number: 3040-01-483-8576
Federal Supply Class: 3040
National Item Identification Number: 014838576
Description: SHAFT,STRAIGHT
Detail: A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
563-7067897-53 | 53711 | NAVAL SEA SYSTEMS COMMAND | 7067897 | 53711 | NAVAL SEA SYSTEMS COMMAND | H696-1603-53 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
END SIMILARITY | IDENTICAL | FIRST END DIAMETER | 2.2450 INCHES MINIMUM AND 2.2470 INCHES MAXIMUM | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.5600 INCHES NOMINAL | FIRST END HOLE DIAMETER | 0.6410 INCHES NOMINAL | FIRST END HOLE DEPTH | 2.2470 INCHES NOMINAL | FIRST END SPLINE LENGTH | 5.1900 INCHES NOMINAL | FIRST END SPLINE MAJOR DIAMETER | 2.2450 INCHES MINIMUM AND 2.2470 INCHES MAXIMUM | FIRST END SPLINE MINOR DIAMETER | 1.9130 INCHES MINIMUM AND 1.9280 INCHES MAXIMUM | FIRST END SPLINE QUANTITY | 9 | FIRST END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | OVERALL LENGTH | 10.3800 INCHES NOMINAL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM-2 COND-ANL FED SPEC SINGLE MATERIAL RESPONSE | MATERIAL | NICKEL ALLOY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, LOWER | SPECIAL FEATURES | MODIFIED 10 SPLINE FULL LENGTH OF SHAFT | SURFACE FINISH | 63.0 MICROINCHES |
|
|