5365-01-483-5095 SPACER,RING Index 5340-01-483-5097 CLEVIS,ROD END

National Stock Number:
3040-01-483-5096

Federal Supply Class:
3040

National Item Identification Number:
014835096

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
167-7066805-13053711NAVAL SEA SYSTEMS COMMAND
706680553711NAVAL SEA SYSTEMS COMMAND
H547-2003-13096169ELECTRIC BOAT CORPORATION


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER4.5000 INCHES NOMINAL
FIRST END SLOT DEPTH0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM
FIRST END SLOT WIDTH1.0030 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
FIRST END STYLESLOTTED
LARGEST STEP DIAMETER4.5000 INCHES NOMINAL
OVERALL LENGTH22.5930 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FORM-2 COND-ANL FED STD SINGLE MATERIAL RESPONSE
MATERIALNICKEL ALLOY
PART NAME ASSIGNED BY CONTROLLING AGENCYSHAFT, HINGE
SECOND END EXTERNAL THREAD LENGTH20.3280 INCHES NOMINAL
SECOND END DIAMETER1.5000 INCHES NOMINAL
SECOND END STYLEEXTERNAL THREADED
STEP QUANTITY3


Click here to Register for Free 30-day Trial