|
|
|
National Stock Number:
3040-01-482-8600
Federal Supply Class:
3040
National Item Identification Number:
014828600
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 122-5277667 ITEM 19 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5277667 | 53711 | NAVAL SEA SYSTEMS COMMAND | | A22-5277667 ITEM 19 | 97537 | JUNIPER ELBOW CO. INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8750 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 1.412 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | OVERALL LENGTH | 5.0100 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 CR 8620 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 2ND END BASE 3.0000 IN. WIDE X 3.5000 IN. LONG X 0.6300 IN. THICK. DOG SPINDLE USED ON 66 X 72 HRWT DOOR. | | STEP QUANTITY | 3 |
|
|