|
|
|
National Stock Number:
3040-01-355-7659
Federal Supply Class:
3040
National Item Identification Number:
013557659
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 11737892 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.117 INCHES NOMINAL | | FIRST END DIAMETER | 0.1872 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1470 INCHES MINIMUM AND 0.1490 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 1.400 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TY 303SE COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.1872 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.750 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | SURFACE FINISH | 16.0 MICROINCHES |
|
|