|
|
|
National Stock Number:
3040-01-353-8509
Federal Supply Class:
3040
National Item Identification Number:
013538509
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10107274 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 526-1067 | 25583 | L3HARRIS AVIATION PRODUCTS, INC | | 526-1067-02 | 25583 | L3HARRIS AVIATION PRODUCTS, INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.3590 INCHES NOMINAL | | FIRST END DIAMETER | 0.1320 INCHES MINIMUM AND 0.1334 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.0640 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.226 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.605 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.1380 INCHES MINIMUM AND 0.1410 INCHES MAXIMUM | | SECOND END DIAMETER | 0.1320 INCHES MINIMUM AND 0.1334 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0250 INCHES MINIMUM | | SECOND END HOLE DIAMETER | 0.0650 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.0700 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0882 INCHES MINIMUM AND 0.0905 INCHES MAXIMUM | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | STEP QUANTITY | 4 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|