|
|
|
National Stock Number:
3040-01-353-7490
Federal Supply Class:
3040
National Item Identification Number:
013537490
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1008-067-004 | 79410 | LIBERTY VENTURES INTI LLC | | 121783 | 60764 | WIGGINS LIFT CO INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.6530 INCHES MINIMUM AND 1.6535 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.735 INCHES MINIMUM AND 1.745 INCHES MAXIMUM | | OVERALL LENGTH | 10.938 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END GROOVE DIAMETER | 1.2000 INCHES MINIMUM AND 1.2100 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM | | SECOND END DIAMETER | 1.3580 INCHES MINIMUM AND 1.3630 INCHES MAXIMUM | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.2660 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.2040 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.2190 INCHES NOMINAL | | SECOND END STYLE | THREE CIRCULAR GROOVES | | STEP QUANTITY | 5 |
|
|