|
|
|
National Stock Number:
3040-01-350-9067
Federal Supply Class:
3040
National Item Identification Number:
013509067
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 6406833 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6406833-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 752-6406833-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8780 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.7083 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.940 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.6390 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 17 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL | | OVERALL LENGTH | 7.906 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.718 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.593 INCHES NOMINAL | | SECOND END DIAMETER | 0.9845 INCHES NOMINAL | | SECOND END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY | | SECOND END KEYWAY DEPTH | 0.0938 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.1880 INCHES NOMINAL | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|