|
|
|
National Stock Number:
3040-01-350-8441
Federal Supply Class:
3040
National Item Identification Number:
013508441
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10107258 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3168811-5 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| FIRST END DIAMETER | 0.3721 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.524 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | OVERALL LENGTH | 6.530 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.2481 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.130 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 9 |
|
|