|
|
|
National Stock Number:
3040-01-342-0622
Federal Supply Class:
3040
National Item Identification Number:
013420622
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 6197557 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6197557 PART 24 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6197588 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.2520 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.7470 INCHES NOMINAL | | OVERALL LENGTH | 8.312 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OR ASTM A276,COND A ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316 | | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.6250 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.6200 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | SPECIAL FEATURES | KEYWAY 0.188 IN. WIDE LOCATED CENTER OF SHAFT | | STEP QUANTITY | 3 |
|
|