|
|
|
National Stock Number:
3040-01-323-9122
Federal Supply Class:
3040
National Item Identification Number:
013239122
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1363M95P01 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.0650 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.3950 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2475 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.1160 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 29 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 1.330 INCHES NOMINAL | | OVERALL LENGTH | 3.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6414 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | STEP QUANTITY | 8 | | SPECIAL FEATURES | SECOND SPLINE HAS 19 TEETH,PITCH DIA. 0.7917 IN.,PRESSURE ANGLE 30 DEG.,MAJOR DIA. 0.8305 IN.,MINOR DIA. 0.700 IN. |
|
|