|
|
|
National Stock Number:
3040-01-264-5617
Federal Supply Class:
3040
National Item Identification Number:
012645617
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 413-10676 | 82918 | THE BOEING COMPANY | | 413-10676-1 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9700 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 7.900 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 15.5PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 1.5400 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.4180 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 30 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.5000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.700 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.5400 INCHES NOMINAL | | STEP QUANTITY | 8 | | SURFACE FINISH | 100.0 MICROINCHES |
|
|