|
|
|
National Stock Number:
3040-01-263-7483
Federal Supply Class:
3040
National Item Identification Number:
012637483
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 16VM003003 | 81755 | LOCKHEED MARTIN CORPORATION | | 2022976-7-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 2.0000 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.7500 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1930 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 14.380 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | BOTH ENDS ARE INTERNALLY SPLINED WITH 15 TEETH | | STEP QUANTITY | 4 |
|
|