|
|
|
National Stock Number:
3040-01-259-4568
Federal Supply Class:
3040
National Item Identification Number:
012594568
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1363M96P01 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | 1363M96P01 | 07482 | GENERAL ELECTRIC COMPANY | | 1363M96P01 | 11371 | BMT AEROSPACE USA, INC. | | 1363M96P01 | 21540 | PRECISION GEAR INDUSTRIES LLC | | 1363M96P01 | 57152 | TRIUMPH GEAR SYSTEMS - MACOMB, INC | | 1363M96P01 | 82402 | TRIUMPH GEAR SYSTEMS INC | | 1363M96P01 | 91514 | AIRCRAFT GEAR CORP | | 42411-166 | 82402 | TRIUMPH GEAR SYSTEMS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.3300 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.3950 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2335 INCHES NOMINAL | | FIRST END GROOVED FLAT LENGTH | 0.5150 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.0950 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 24 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.330 INCHES NOMINAL | | OVERALL LENGTH | 3.360 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6414 ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.9300 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6950 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.5155 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8475 INCHES NOMINAL | | STEP QUANTITY | 10 |
|
|